DT swiss has lots of conversion adapters so you can quickly throw a QR on that wheelset and use it in your new frame. Alternative, consider a thru-bolt instead of a QR. Benefits of a thru-axle, convenience of a QR.
Yes you need to use the skewer for the trainer. This will give a fractionally better bit of firmness, but primarily, if you change your fork down the road, you can get one with thru-axle. Check your bike axle: The primary factor determining if you can convert your quick release wheel to a bolt-on axle is the type of your hub. Bike models such as Shimano have axles that can easily be changed.
So, the lock nuts and cone nuts from the quick release wheel cannot be used with the bolt-on axle. You want your rear axle very tight. If it is not tight it will allow the rear wheel to move around and it ties your rear triangle together.
Basically the whole back of the bike will feel sloppy. You definitely can over do it and it can potentially cause damage to the qr lever if you do. The cheaper open cam skewers can be nearly impossible to over tighten, or even get tight enough unless you lubricate the interface between the lever cam and the concave washer though. Both quick release skewers and thru axles are metal rods that keep bicycle wheels in place.
Skewers use a camming mechanism to secure the wheel to u-shaped fork dropouts. Thru axles thread through the wheel hub and circular dropout holes. The axle will stay inserted in the hub. Quick release cycle skewer for trainer Road MTB bicycle universal fit. Designed to secure perfectly into the clamps holding the cycle rear wheel to the turbo trainer.
A quick release skewer is a mechanism for attaching a wheel to a bicycle. Wheels equipped with quick release mechanisms can be removed from the bicycle frame and replaced without using tools by opening and closing the cam lever, thus more quickly than wheels with solid axles and nuts.
Skewer length depends on the distance between the outside faces of the dropouts, and the depth of the adjusting nut. It is easiest to measure the distance between the outer faces of the dropouts after removing the wheel.
If you are unsure of your frame spacing or have an older bicycle, measure the hub width to ensure a proper fit. To do this, remove the rear wheel and use a pair of calipers or a ruler to measure the distance between the inner surfaces of the dropouts. Tyres have rolling direction so they roll faster. It is not the end of the world. Thru axles attach the wheels more securely and reduce the likelihood of wheel attachment caused by human error.
Quick release axles allow for more flex in the front end of the bike, which hurts handling- Disc brakes can cause the fork arms to flex. If you have any questions, ask your dealer. Improper hub installation can result in serious injury. How to properly install your Shimano Quick Release. Notice: Be sure to operate the quick release lever by hand only.
Never use any other tool such as a hammer to tighten the quick release lever, as this could cause damage to the lever. Note Products are not guaranteed against natural wear and deterioration from normal use and aging.
For maximum performance we highly recommend Shimano lubricants and maintenance products. What is a Quick Release?
0コメント