There is no support of the distributed virtual switch , host profiles auto deploy , VM encryption, Distributed Resource Scheduler , accelerated graphics for VMs, and some other features in this vSphere edition. One acceleration kit contains a license for 6 processors and a license for 1 vCenter instance vCenter Server Standard. VMware Essential Kits are good for small organizations.
Read the blog post about VMware vSphere editions to learn more about all vSphere editions. You can always pay for a higher edition of VMware vSphere. In this case, you have to deactivate the old license key and apply the new one.
If you upgrade the ESXi version that starts with the same number, you can continue to use the assigned license. For example, if you upgrade ESXi 6. If you upgrade a major ESXi version to a higher version that starts with a different number, the ESXi host starts a new day evaluation period. License keys for vSphere 5.
If you assign a license on an ESXi host and then connect this host to vCenter, the license for this ESXi host is displayed in vCenter licensing settings automatically. VMware vCenter displays information about the utilized CPU capacity of the assigned license and the remaining number of unused processors that you can license on other ESXi hosts.
In this case, the license remains valid even after a reboot of the ESXi host. The workflow for ESXi 6 licensing in vCenter 6. In the navigation pane, click Manage and go to the Licensing tab.
Information about the current license is displayed on this page. On the following screenshot, see information about the day Evaluation license used after installing ESXi. In summer, , VMware announced the elimination of its Enterprise edition. Thus, the following three VMware vSphere editions are now available earlier there were 6 different editions :.
The next table shows the main features available in different editions:. In addition to Standard features, vSphere Enterprise edition offers the following options:.
When purchasing any of the licenses described above, you also have to buy a vCenter Server Standard license. Two editions are available:. At some point, if you want to destroy the cluster or just return the license back to CSSM so that it can be re-used, you can use the reservation return command to generate a return code that can be deposited back.
Enter the command stcli license reservation enable on the HX node to enable the reservation mode. Entering this command switches the configuration mode into reservation mode.
No license status is changed. On the left side of the following screen, you can view the status for a typical cluster with a regular registration. In reservation mode, you can see the difference in that status. For a typical device, if you look at the reservation status, it shows as registered.
The license authorization status will be authorized. If you have an individual license, it will tell you which license is in compliance. On the right side, you can see the system is in the unregistered state and using the evaluation license. Enter the command stcli license reservation request to make a reservation request.
In the License section, click on the Smart Software Licensing link. Under the Licenses tab, click License Reservation. Verify the information provided, then select the checkbox to Reserve a specific license.
Review and Confirm — Review and confirm the product instance details and license to reserve, then click the Generate Authorization Code button at the bottom of the screen. Authorization Code — View the authorization code, which you can use on the device side, then click the Download as File button at the bottom of the screen. Go to the Product Instances tab to view the license you just reserved, which is located in the row corresponding to the class and serial number of your reservation.
Click the link in this row shown in the red box. From this page, you can view general details of the license. You can also download the reservation authorization code highlighted in red above in case you lose it in any given instance. You can always return to this page to retrieve it again. You can then go back to the Licenses tab to view the current license consumption. You can also enter the command stcli license show reservation on the HX node to show the SLR reservation. The response shows that SLR has been installed.
To cancel a reservation request that you started before going to CSSM to get an authorization code , use the stcli license reservation cancel command.
Verify that the reservation request was canceled by using the stcli license show reservation command. After entering this command, you should see that the status has returned to unregistered.
Now that the license on the cluster is fully active, at a later time, you can destroy the cluster and return the license to CSSM so it can be re-used for another cluster.
The following steps describe how to return your SLR license. Enter the command stcli license reservation return. A return code is then generated that you can use in CSSM. If you look at the status, the license reverts back to being an unregistered evaluation license just as it was before you registered it.
Go back to CSSM to return the license back to the pool. Go back to the Product Instances tab, use the Actions menu, then click Remove. The Remove Product Instance dialog box appears, which allows you to enter the return code. Enter the return code, then click Remove Product Instance. In the Product Instances tab, you can see that the SLR license you previously registered is now gone. You can see that there are now only two in use, whereas there used to be three.
At this point the license has been successfully returned. This section describes common error messages that may appear as you configure and use Specific License Reservation SLR. It also provides recommendations on how to troubleshoot if applicable. During configuration, if you issue a reservation request command before you enable the reservation mode, an error message appears indicating that " License Reservation is not enabled ".
Or, if you request to cancel an operation that you did not request, a message appears indicating that " No reservation process is pending ".
The following image shows these errors:. During run-time when the license status changes, initial registration fails with a communication send error. This message typically appears when entering the show status command. The library does not propagate the error to the top but you can find the actual reason by using the logs. Issue a grep command and view the SL column to identify errors and all other SL-related messages in the log.
For example, the following image shows that a proxy is being used and that the proxy connection failed. The architecture of vCenter Server Appliance has been simplified , which has considerably improved its performance. Thus, the following enhancements have been noted: faster performance of operations per second and a reduction in the RAM usage. Moreover, you can now schedule backups of vCenter Server instances and choose the number of backups to keep.
Hybrid Linked Mode ensures the seamless scalability of your operating environment. This feature is an ideal solution for large virtual environments as it allows you to easily manage and expand on-premise VMware vSphere-based environments, as well as to connect them with VMware-compatible clouds such as VMware Cloud on AWS. By installing the hardware modules supported by vSphere, customers can build new high-speed storage for running applications. These features protect the infrastructure and its components from any security threats or unauthorized access.
Single Reboot Upgrade and vSphere Quick Boot ensure that the time spent on patching and upgrading the system is significantly reduced as the host reset is discarded.
Per-VM Enhanced vMotion Compatibility and Cross-vCenter Mixed Version Provisioning enable the smooth transition of workloads across a hybrid cloud environment, even if they have different vCenter versions.
Instant Clone allows you to instantly copy clone a source parent VM by using a copy-on-write technique. Created clones share the disk and memory of the parent VM, but any changes made in the child VM are reflected and stored in it alone.
This feature ensures maximum efficiency and high performance when working in large environments that operate on multiple virtual desktops. VMware constantly works to improve its functionality by adding more new features and improving the existing ones.
With the help of vSphere 6. The Director is the central component of the product, and is responsible for the management of various operations, including licensing. Only one license can be installed at a time. If needed, the license can be changed in the Configuration section.
Target hosts for your replicas, or hosts that are used for the recovery of VMs, do not require licensing. This licensing type is available on either a perpetual or subscription basis.
0コメント